Home Oil & Gas Marine Engineering Outdoor Contracts Marine Salvage Wharf Construction Container Repairs Supplies
 

Pipe & Tubing Supplies (Oceania) Ltd (PTSOL)

 

 

         

+

Linepipe

+

Casing

+

Tubing

+

Exotics

+

OCTG

 

 

 

* Port Maintenance Group can supply Tubulars in mill quantity (50 tonnes minimum order) from our Bluff headquarters.

These products are supplied in the following grades and specifications:

 

 

Hot and Cold finished Seamless Pipe & API OCTG
Diameters 36mm up to 377mm and casing up to 133/8"
Specifications API 5CT, API 5L, ASTM, EN, ISO, DIN and COST
Certification EN ISO 9001
   
Hot Rolled Seamless Pipe
Diameters 1¼" up to 4½" - Steel grade: from A up to X-65 (X-70) (PSL-1, PSL-2)
Followed by Sizing and stretch reducing mills as well as OCTG finishing floors
Specifications EN, ISO, DIN, COST, ASTM, API 5CT & API5L
Certification EN ISO 90011 & EN ISO 14000
   
ERW/HFI, Plasma and SAW Pipe
Diameters 6" up to 21" on ERW Line (up to 18 meters)
Diameters Up to 40" SAW Line (up to 12 meters)
Diameters Up to 4½" ERW and Plasma welding lines
Specifications API 5L, ASTM, EN, IOS, DIN and GOST
Certification EN ISO 9001

 

 

 

bullet

Quality management system at the pipe production facilities correspond with ISO 9000, European Directive 97/23/EC and API Q1 requirements.

 

bullet

Product chemical analysis control, tensile, bending, flattening, hardness, impact and metallographic tests are performed on state-of-the-art testing equipment, which is examined regularly.

 

bullet

Pipes are hydro tested on single and double-head hydro testers for standard and alternative pressures up to 20,000 psi. A NACE testing laboratory is an in- house feature and in addition the ERF/HFI line has an EPOXY coating facility attached.

 

bullet

Non-destructive testing is performed using ultrasonic, electromagnetic, eddy current and magnetic particle inspection methods on the equipment produced by the most reputable world manufacturers.

 

bullet

Pipes are supplied according to the following standards: API 5L, API 5CT (5D), DIN, ASTM, EN ISO 11000, NFA, GOST. Quality of the pipe produced according to the International Standards has been confirmed by Certificates and Monograms of the expert organisations since 1994.

 

 

 

  Contact Peter Johnson for pricing and further information on:

Email: peter.johnson@clear.net.nz     Phone: 64 3 5451002      Mobile: 64 27 280 6688


 

Marine Salvage Container Repairs Supplies
Marine Engineering
Outdoor Contracts Wharf Construction
Home Oil & Gas